How to install the basin faucet - the installation process of the basin faucet

How to install the basin faucet - the installation process of the basin faucet
The faucet is an inseparable thing in our life, and now the faucet has been diversified. But the installation of the faucet is basically the same. Today, the editor will introduce the installation process of the faucet in detail for you. Install faucets for your future home as a reference. 1. Step 1: Take out the basin faucet and check whether all the accessories are complete. Before installation, be sure to remove the dirt around the installation hole and in the water supply pipe to ensure that there is no impurities in the water inlet pipe of the basin faucet. To protect the surface of the faucet from scratches, it is recommended to wear gloves for installation.
2. Step 2: Take out the rubber gasket of the basin faucet, the gasket is used to relieve the pressure of the metal surface of the faucet in contact with the ceramic basin, protect the ceramic basin, and then insert a water inlet pipe and tighten it.
3. Step 3: Put the threaded joint into the first water inlet hose, and then put the water inlet end of the second water inlet hose through the threaded joint.
4. Step 4: Screw the second water inlet hose into the water inlet port, pay attention to the correct direction, use a balanced force, and then tighten the threaded joint.
5. Step 5: Put the two water inlet hoses into the white rubber pad.
6. Step 6: Put on the lock nut to fix the faucet.
7. Step 7: Then tighten the sleeve.
8. Step 8: Tighten the two water inlet pipes and the angle valve interfaces respectively. Do not twist the pipes with full force with a pipe wrench to prevent deformation or even breakage. Pay attention to the connection of hot and cold water. Connect the water outlet angle valve with the other end of the water inlet pipe.
Basin faucet how to install - Basin faucet installation essentials
When installing the single-handle basin faucet, a special angle valve must be selected, and the angle valve must be fixed with the hot and cold water pipes of the wall. If the water inlet pipe is too long and exceeds the water outlet pipe, you can cut off the part according to your needs. If the angle is not suitable, you can bend it to the position you need according to your needs. Remember: Do not bend hard to 90 degrees or more. When installing the basin to drain, please don't forget to buy the small interface of the faucet (the faucet is shorted). Don't forget to flush the pipes buried in the wall before you install.
Before installing the thermostatic faucet, please check whether the water pipes are hot on the left and cold on the right. Remember not to connect the hot and cold water pipes wrongly, so as to avoid the faucet not working properly. Gas and solar water heaters cannot use thermostatic faucets because the water pressure is too low. Please do not forget to install the hot and cold water filter when installing the thermostatic faucet.
Basin plays an important role in life. Washing your face in the morning, before and after meals, and at bedtime are all associated with the washbasin, and guests will also use the washbasin when they come to wash. At this time, an elegant and beautiful faucet is crucial. There are thousands of types of faucets, but the installation skills of faucets do not low lead tap change too much. The above method is enough.

Taizhou Luqiao Topman Sanitary Co.,Ltd It is a professional manufacturer, having been producing faucets and fittings since 2003.Kitchen Lead Free/Low Lead Faucets Suppliers and Bathroom Faucets Manufacturers.

Model: TPM-701102