Description of Stainless Steel Hose and Compression Resistance

1. The metal hose mainly uses the pressure regulating valve to adjust the hydraulic pressure. After all the installation work of the metal hose is completed, it must be debugged on site. Press the start button to see if the metal hose can complete the actions of each working condition in sequence. During the debugging process, check whether the metal hose hardware or control system is working normally by watching, listening, etc. In addition, check whether all control buttons and pressure gauges work properly. After debugging for Kitchen low lead tap a period of time, if the operation is normal, the metal hose can be officially delivered for use.
2. Next, carefully read the metal hose diagram to understand the working principle and performance requirements of the metal hose. For this purpose, the functions of hydraulic, mechanical and electrical must be clearly defined and their relationship with each other, action sequence and interlocking relationship, familiar with metal The actual position of each element in the hose on the equipment, their function, performance, structural principle and adjustment method.
3. In addition, the action cycle and motion sequence of each actuator element of the metal hose and the corresponding oil circuit, pressure and flow should be analyzed. How to take effective prevention and reliable contingency measures for the parts where the safety accident of the press/metal hose/metal hose may occur. It is an important step to debug the hydraulic pressure of the metal hose. We should pay enough attention in our daily work, and do not operate wrongly and cause unnecessary losses.
The plastic hose has very good pressure resistance and can bear the pressure of 8Mpa, because the corrugated hose itself has the pressure resistance. The cover can also have a bearing capacity. Generally, a layer of steel wire is used. For plastic mesh bags, when the pressure is particularly high, two or two layers of plastic mesh bags should be used to ensure the working pressure of the pipe body. The raw materials of plastic mesh bags made of steel wire generally use 304 raw materials with a nickel content of more than 8. When writing, pay attention to the writing density. Plastic hoses are generally composed of corrugated hoses, plastic mesh bags and connectors. The corrugated hose is the objective function of the metal hose; the plastic mesh bag has reinforcement and function; the connector plays the role of docking. For different application regulations, one of them is the connection of industrial equipment clamping method called industrial equipment clamping type. In addition, there is also a configuration of the above two methods, which is called a hybrid. Plastic hose products include oil suction pipes, steam pipes, sandblasting pipes, disposable straws for strong oxidants, food industry pipes, steel wire hoses for oxygen blowing pipes and various special-shaped steel wire hoses. Widely used in industrial equipment, chemical enterprises, petroleum, metallurgical industry, food and other industries. The metal hose is an important part of the bearing capacity of the steel wire hose assembled in the pressure vessel equipment, and also serves as the grommet of the corrugated hose. According to the internal pressure of the outlet and the specifications of the metal hose three-jaw chuck of the application site, one or two layers of stainless steel wire or hot-rolled strip can be selected for programming.
Material: Stainless steel
Custom processing: Yes
Process: encrypted weaving
Installation form: thread

We are a professional faucet manufacturer, OEM TPM-9101-Stainless Steel Densified Braided Shower Hose Suppliers
Our goal is to provide customized solutions for the market and customers.
· For any inquiries and feedback from customers, we will respond patiently and meticulously.
· For any inquiry from customers, we will provide the most professional and reasonable quotation as quickly as possible.