Classification of faucets and daily maintenance methods

1. According to the material, it can be divided into SUS304 stainless steel, cast iron, all plastic, brass, zinc alloy material faucet, polymer composite material faucet and other categories.
2. According to the function, it can be divided into basin, bathtub, shower, kitchen sink faucet.
3. According to the structure, it can be divided into several types of faucets such as single type, double type and triple type. In addition, there are single handle and double handle points. The single type can be connected to lead free mixer supplier a cold water pipe or a hot water pipe; the double type can be connected to two hot and cold pipes at the same time, which is mostly used in the faucet of the bathroom vanity and the kitchen sink with hot water supply; the triple type can be connected to two hot and cold pipes. In addition to the pipe, it can also be connected to the shower head, which is mainly used for the faucet of the bathtub. The single handle faucet can adjust the temperature of cold and hot water with one handle, while the double handle needs to adjust the cold water pipe and the hot water pipe respectively to adjust the water temperature.
4. According to the opening method, it can be divided into screw type, wrench type, lift type and induction type. When the screw-type handle is opened, it needs to be rotated many times; the wrench-type handle generally only needs to be rotated 90 degrees; the lift-type handle only needs to be lifted up to discharge water; the sensor-type faucet will automatically discharge water as long as the hand is placed under the faucet. In addition, there is a time-delayed faucet. After the switch is turned off, the water will continue to flow for a few seconds before it stops, so that the dirty things on your hands can be rinsed off when the faucet is turned off.
5. According to the valve core, it can be divided into rubber core (slow opening valve core), ceramic valve core (quick opening valve core) and stainless steel valve core. The most critical factor affecting the quality of the faucet is the valve core. The faucets using rubber cores are mostly cast iron faucets with screw opening, which have now been basically eliminated; ceramic valve core faucets have appeared in recent years, with better quality, and are now more common; stainless steel valve cores have only appeared recently and are more suitable for areas with poor water quality.
6. faucet water purifier
The main water purification technologies used for faucet water purifiers are as follows: (1) Activated carbon technology Fujian Tianbing water purifiers all think that activated carbon is the main water purification material for faucet water purifiers, and the nano-active filter element has better adsorption capacity. It has a good filtering effect on chlorine, heavy metals, and pesticides in water before adsorption saturation. (2) Hollow fiber technology Japan's Toray and Mitsubishi Rayon, domestic home excellent water, etc. use hollow fiber membrane-based water purification technology, which can filter out most of the pollutants in the water, and the filter element needs to be replaced regularly. (3) Ceramic and nano-KDF technology Most of the domestic products use water purification technology based on microporous ceramic filter element and nano-KDF filter material, dechlorination ball and alkaline ball, and the effluent flow is larger than that of the hollow fiber technology. The water purifier and ceramic filter element can be cleaned and used repeatedly. After a certain service life, the filter element needs to be replaced regularly.
Folding faucet maintenance
1. Do not wipe the surface of the faucet directly with a wet towel;
2. Do not wipe the faucet with items with burrs;
3. Do not let the faucet touch the acid and alkali liquid, you can spray a neutral detergent on a soft cloth and gently wipe the faucet;
4. Don't put the faucet directly on hard objects (especially when showing it to customers, don't put it directly on our desk, to make customers feel that your product is not high-end);
5. Wipe with a dry soft cotton cloth.
Folding maintenance
1. Usually, car wax can be sprayed on the surface of the faucet for 3-5 minutes and then wiped, which can maintain the brightness of the faucet sample;
2. Usually it is best not to touch it directly with your hands, because there is oil on your hands that can easily stick to the surface of the faucet, which is not easy to clean and affects the finish;
3. Change the position of the faucet sample frequently;
4. Faucet samples are frequently exchanged, and the following two methods can be adopted:
A. Change the sold faucet samples into new boxes for customers to take away;
B. The samples are exchanged with the company's goods, and the company's delivery personnel will send the samples to the consumers' homes for installation.